Meet our consultants

Qualifications:

• PCN Level 3: Visual Testing, Penetrant Testing, Magnetic Particle Testing 
• ASNT Level 3: Visual Testing, Magnetic Particle Testing, Penetrant Testing, Eddy Current Testing, Radiographic Testing. 
• EN4179 Level 3: Penetrant Testing, Magnetic Testing, Eddy Current Testing, Acid Etch Inspection, Hardness Testing, Electrical Conductivity Testing. 
• FdSc in Non-Destructive Testing  

 Certifications 

• Affiliate Member of the Institution of Mechanical Engineers  
• Full Member of The British Institute of Non-Destructive Testing (BINDT) 
• Incorporated Engineer (IEng) 
• BINDT Council Member. 
• Chair of the BINDT Certification Management Committee.  
• Co-Chair of the Outside Agency/Inside Agency Group.  
• Member of the SNT-TC-1A Committee. 
• Member of the Aerospace Committee.  

Qualifications:

PCN Level 2: Ultrasonic testing (Welds 3.1, 3.2) 

PCN Level 2: Penetrant Testing 

PCN Level 2: Magnetic Particle testing 

PCN Level 2: Radiographic Interpretation 

ASNT Level 3: Magnetic Particle Testing 

ASNT Level 3: Penetrant Testing 

ASNT Level 3: Ultrasonic Testing 

Certifications

Affiliate Member of the Institution of Mechanical Engineers  

Full Member of The British Institute of Non-Destructive Testing 

Full Member of The American Society for Non-Destructive Testing 

Full Member of the Chartered Management Institute 

Qualifications:

PCN Level 2: Ultrasonic testing (Welds 3.1, 3.2,3.7,3.8,3.9), Penetrant Testing, Magnetic Particle Testing, Eddy Current Testing, Radiographic Testing & Phased Array 

PCN Level 3: Magnetic Particle Testing, Penetrant Testing, Ultrasonic Testing, Phased Array, Radiographic Testing & Eddy Current Testing 

ASNT RT Level III 

ASNT UT Level III 

Certifications  

Affiliate Member of the Institution of Mechanical Engineers  

Full Member of The British Institute of Non-Destructive Testing (BINDT) 

Full Member of The American Society of Non-Destructive Testing (ASNT) 

Philip is a Level 3 Consultant, Trainer and Examiner and has over 34 years’ experience in NDT, holding a BSc (Hons) and Level 3 certification for PCN, Rolls Royce, Augusta Westland, Airbus and BAE Systems, as well as ASNT and EN 4179 Level III certification.

Mick is our resident expert on new and advanced NDT methods. In addition to his role as a Level 3 Services consultant, Mick also runs training courses for IMechE Argyll Ruane in Visual Testing, Magnetic Particle Testing, Penetrant Testing, Ultrasonic Testing, Phased Array and TOFD.

Andrew is one of the most experienced and highly qualified Level 3 NDT specialists in Radiography Testing in the world. He also holds a high level of knowledge of the oil and gas industry as well as castings and welds. Not only is Andrew a specialist in Film Radiography, he is also a specialist in Computed and Digital Radiography and has some experience in Computed Tomography.

Stephen joined the company in January 2022 as an NDT Level 3 Consultant, Trainer, and Examiner. Being within the industry for around 11/12 years, he has always strived towards pushing himself to the absolute limit both mentally and physically.

Qualifications:

BSc in Non-Destructive Testing

Level 3 ASNT Level III for Ultrasonic Testing

PCN Level 3: Visual Testing, Penetrant Testing and Ultrasonic Testing of Forgings.

PCN/SNT Level 2: Magnetic Particle Testing, Penetrant Testing, Visual Testing, Ultrasonic Testing of Forgings, Welds (3.1, 3.2), Ultrasonic Testing of Railway Axles and Eddy Current Testing of Welds. 

Qualifications:

PCN Level 2: Visual Testing

PCN Level 2: Penetrant Testing

PCN Level 2: Magnetic Particle Testing

PCN Level 2: Ultrasonic testing (Welds 3.1, 3.2, 3.8, 3.9, Critical Defect Sizing, Forgings, Castings)

PCN Level 2: UT Phased Array

PCN Level 2: Time of Flight Diffraction

Certifications

Affiliate Member of the Institution of Mechanical Engineers

Qualifications:

• PCN Level 2: Magnetic Particle Testing, Liquid Penetrant Testing, Ultrasonic Testing, Eddy Current Testing