Special note
Candidates attempting a PCN examination must meet the PCN/GEN requirements. If attempting an ASNT/EN4179/NAS410 examination the requirements of your company’s written practice must be met. This course is not suitable for BGAS-CSWIP examination preperation.
- Electrical properties
- Principles of magnetism
- Principles of electromagnetism
- Eddy Current inspection equipment
- Equipment calibration
- Defect detection and evaluation
- Eddy Current techniques
- Extensive hands-on experience
- Report/instruction writing
- Relevant standards
- PCN documentation
Validated by BINDT and recognised by PCN
An individual certified to Eddy Current Testing Level 2 has demonstrated competence to perform NDT according to NDT procedures. Within the scope of the competence defined on the certificate, Level 2 personnel may be authorised by the employer to:
- Select the Eddy Current Testing technique for the test method to be used
- Define the limitations of application of the testing method
- Translate Eddy Current Testing codes, standards, specifications and procedures into Eddy Current Testing instructions adapted to the actual working conditions
- Set up and verify Eddy Current Testing equipment settings
- Perform and supervise Eddy Current tests
- Interpret and evaluate results according to applicable standards, codes, specifications or procedures
- Prepare written Eddy Current Testing instructions
- Carry out and supervise all tasks at or below Level 2
- Provide guidance for personnel at or below Level 2
- Report the results of Eddy Current tests.
PCN Certification is awarded once the student has demonstrated the required experience and training hours have been met and successful completion of the PCN examination has been achieved.
Eddy Current Testing
Level 2 – 40 training hours and 9 months experience (Assuming the candidate holds a current Level 1 Certificate)
Direct access to PCN Level 2 would be achieved by combining the experience and training hours of Level 1 and Level 2:
Direct access Level 2 – 80 training hours and 12 months experience
If you are wanting to quickly gain the experience required for your certification, accelerated learning might be for you. You can gain up to 50% of the required experience through this method.
192 hours of training is the equivalent of 960 hours of work experience. This is 50% of the 1920 required hours of experience to gain your certification.
The price of training will vary depending on your own requirements, contact us and we can work this out for you.
(excl. VAT)
If Level 1 held
Training course: £1,188
Examination: £344
PCN levy: £88
PCN PED Admin Charge: £47
Total: £1,667
Direct
Training course: £1,512
Examination: £344
PCN levy: £88
PCN PED Admin Charge: £47
Total: £1,991
Note: Prices are correct at time of issue but may be subject to change, with the exception of confirmed bookings.
